Issue 4
Page 10 of
14
OPERATION
TAPE
To use the
TAPE
input, connect external source to the
TAPE
input (see page 7). Select
TAPE
input by pressing
the
TAPE
button so
TAPE
LED is lit. Selecting the
TAPE
input can also be achieved by pressing the
corresponding button on the remote handset (see page 8).
TAPE MONITOR
To record to tape, (or alternatively CD recorder, DAT, minidisk or computer soundcard analogue input) connect
the tape out to the tape recorder line in. Press the input selector button on the front panel or remote control.
This source will now be routed to the M6i
TAPE OUT
for recording by tape deck.
The recording can be directly monitored through the loudspeakers by pressing the
TAPE MONITOR
button so
the
TAPE MONITOR LED is lit
. Press again to return back to the original input being listened to (and
TAPE
MONITOR
LED is out again).
On some 3 head tape decks there is an additional tape/source switch which should be in the 'TAPE' position for
this to work. If in doubt, please consult tape deck operating manual.
Note – adjustment of the volume control has no effect on the recording level.
