M3SCD issue 1
Page 10 of
20
PAUSE 1 0:03
STOP 7 41:56
PLAY 1 0:01
STOP. 1 0:00
CD PLAYER
Switch on unit. To load a CD load the CD into the tray, press the
▲
(eject) button so the tray comes out. The
tray may then be closed by giving it a gentle push, or pressing
►
|
▐▐
(
play/pause) button on the front panel or
remote, or the
▲
(eject) button on the front panel
The unit will scan the contents of the disc. After a short delay, the display window then shows the total number
of tracks available on the CD, and total playing time. In the following example there are 7 tracks, lasting a total
of 41 minutes 56 seconds
PLAY
►
|
▐▐
If
►
|
▐▐
button on front panel or remote control is pressed, the unit will begin playing from track 1, confirmed by
the word
PLAY
appearing on the left of the display, with
1
in the centre and elapsed time on the right.
When all tracks on the CD have been played, the display shows
STOP
and total number of tracks on the disc.
PAUSE
►
|
▐▐
Pressing the
►
|
▐▐
button on front panel or remote control when disc is playing will halt playback.
PAUSE
appears in the display windows instead of
PLAY
. The disc will continue spinning, but the track does not
advance and the CD's output is muted. Pressing
►
|
▐▐
again resumes playback from the same place.
STOP
█
Playback can be stopped at any time by pressing the
█
button on front panel or “STOP” on the remote control.
EJECT
▲
The CD may be removed by pressing the
▲
button on the front panel at any time. The CD will come out of the
slot to approx 2/3rds of the way to allow easy removal.
Note: If the CD is ejected but not removed, it will be retracted back into the mechanism for safety after a few
seconds. After the contents have been scanned, the CD is ready to be played or ejected again.
NO DISC
OPERATION
