April 20th 2016
www.thonk.co.uk
2
TURING MACHINE Mk ii
(APRIL 2016 ONWARDS)
Eurorack DIY Kit
Instructions
Version 1.01
SOLDER JOINTS
Your solder joints should look like those shown as ‘OK’ below, they should
have that neat conical shape on
BOTH sides of the PCB
. If they don’t look
the same on both sides then stop! Work out why from the soldering guides
linked and don’t continue until you are getting those results.
This isn’t about perfectionism, you are very likely to end up with a destroyed,
damaged or defective unit if you’re not hitting that standard.
This photo is from the
Adafruit guide to excellent soldering
-
http://
bit.ly/1l77tF4
and is reproduced under an Attribution-Sharealike
creative commons license -
http://creativecommons.org/licenses/by-sa/3.0/
