3
GETTING STARTED
Thank you for purchasing the Music Hall pa1.2 phono preamplifier. This manual
provides valuable information that will help you get optimum performance from
your system. Please contact your authorized Music Hall dealer for any additional
clarifications you may require.
Shipping or moving the pa1.2 in anything
other than the original packing material may result in severe damage that is not
covered by the warranty. Be sure to keep the original sales receipt; it is your best
record of the date of purchase, which you will need in the event warranty service
is required.
Save the shipping carton and all enclosed
packing material for future use.
SET-UP
The pa1.2 must be used in either MM (moving magnet) or MC (moving coil) mode
according to the construction principle of the phono cartridge to be used. To find
out which type your cartridge is please consult the literature accompanying your
cartridge. If in doubt please consult your dealer. A switch on the back of the
pa1.2 sets the correct loading and level of amplification for the cartridge. Before
setting MM/MC the unit must be disconnected from the power supply and amplifier.
Connecting the Turntable
Connect the tonearm signal lead to the
on the pa1.2. Take care to connect
the left and right channels correctly. The right channel is usually marked red the
left channel black or white.
The ground wire of the tonearm lead should be
connected to the ground terminal.
IN
IN
OUT
GND
15V AC
15V AC
- MM
- MM
- MC
- MC
R
audio components
audio components
Designed and developed in the USA
- MM
- MM
- MC
- MC
