7
1.
GENERAL SECTION
Power Supply
DC12V
，
2.0A
Dimensions
17.1(W) x 14.5(D) x 4.2(H) in. 435(W) x 367(D) x 106(H) mm
Consumption
4W
Weight
11lbs. 5Kg
2.
TURNTABLE SECTION
Type
3-speed full manual
Motor
DC motor
Driving Method
Belt drive
Turntable Platter
296mm dia. Aluminum die-cast
Speeds
33
1
/
3
, 45 and 78rpm
Wow and Flutter
TYPICAL: Less than 0.1% WTD at 3KHz RMS(CD-4005)
LIMIT:
Less than 0.15% WTD at 3KHz RMS(CD-4005)
S/N Ratio
More than 62dB (DIN-B) (SS-4242)
Speed Tolerance
/-1%(CD-4005)
3.
CARTRIDGE SECTION
Type
Moving magnetic cartridge
Stylus
Diamond stylus
Height of Arm Lifter
7.5mm (the distance between the record and the stylus when the lifter
lever is pulled up)
Channel Separation
More than 15 dB at 1KHz (CD-4005)
Channel Balance
Within 2.5 dB at 1KHz (CD-4005)
Phono Output Level
1.5~3.6 mV at 1KHz 5cm/sec (CD-4005)
Line Output
90-216 mV at 1KHz 5cm/sec (CD-4005)
RIAA
20Hz~20KHz: +1/-3 dB
4.
Cartridge: AT3600L
Output Voltage
2.5mV +/- 3dB at 1KHz 3.54cm/sec (AT6606A)
Channel Separation
More than 18dB (AT6606A)
Channel Balance
Within 2dB at 1KHz (AT6606A)
Frequency Response
0 +/-3dB at 10KHz (AT6606A)(Value at 10KHz based on value at 1KHz)
Tracking Force
3.5 ± 0.5 g
5.
TONEARM SECTION
Type
Dynamic balanced straight shaped w/soft damping control
Effective Arm Length
221.5mm
Overhang
19mm
Offset angle
25.61
∘
Tracking Error Angle
3 degree or less
Stylus pressure adjustment method
Rotation movability
Arm lifter
Oil damper type
6.
ACCESSORIES SUPPLIED
Instruction manual x 1
45 rpm adaptor x 1
Signal wire x 1
Counter weight x 1
Power Adapter x 1
Dust cover x 1
Turntable rubber sheetx1
Hinge x 2
Platter x1
7.
NOTES
(1) The specifications are subject to change to any improvement by negotiations in advance.
(2) The parts are subject to change to any improvement within the range of the specifications.
SPECIFICATION
