![Music & Lights ProLights Tribe LUMI4COMPAQ Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/music-and-lights/prolights-tribe-lumi4compaq/prolights-tribe-lumi4compaq_user-manual_1858671022.webp)
LUMI4COMPAQ
8
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
15
33
33-47
48
63
78
Fig.5 - Example 15 DMX channels configuration
DMX Address: 33
............
DMX512 Controller
DMX Address: 48
DMX Address: 63
DMX Address: 78
3.7 OBEY3 MODE
The LUMI4COMPAQ has a 3 channel DMX RGB configuration which can be accessed from the control panel.
• Press the button MENU so many times until the display shows
Ob-3
, then press the ENTER button to
activate this mode.
3.8 LINKING
Several units may be interconnected in order to control all further slave units to the same effect of the mas-
ter unit. Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of
the units. For longer cable runs we suggest a terminator at the last fixture (see page 10).
1. Connect the DMX OUT of the master unit via 3-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
3.9 DMX CONFIGURATION
LUMI4COMPAQ is equipped with a 15 channel DMX configuration.
• Press the button MENU so many times until the display shows
A001
, then press the button ENTER.
• Press the button UP/DOWN to select the desider value
001 - 512,
then press the button ENTER to confirm.
The table on page 11 indicate the operating mode and DMX value. The LUMI4COMPAQ is equipped with
3-pole XLR connections.
3.10 DMX ADDRESSING
To able to operate the LUMI4COMPAQ with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the LUMI4COMPAQ. The other functions of the light effect panel are
then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Содержание ProLights Tribe LUMI4COMPAQ
Страница 1: ...MANUALE UTENTE USER MANUAL LUMI4COMPAQ IT EN PORTABLE LED WASHER SET...
Страница 26: ......
Страница 27: ......