Music & Lights PROLIGHTS CROMOBEAM250, Руководство пользователя

Страница: 41 / 52

17
CROMOBEAM250
000-255 Starting point for the limited Pan P/start
000-255 Finishing point for the limited Pan P/finish
000-255 Finishing point for the limited Tilt T/finish
000-255 Starting point for the limited Tilt T/start
Range function
• Press the MENU button, select the [ Range ] menu voice and press the ENTER button to confirm the choice.
• Select the parameter to be changed between [ P/start ], [ P/finish ], [ T/start ] and [ T/finish ]; press the ENTER
button to confirm.
• Set the desired parameter value (0-255) using the UP and DOWN buttons and press the ENTER button
to confirm the setting.
• Press the MENU button to go back or wait 30 seconds for automatic exit from the menu.
without delay
3 seconds delay
Yes
System
No
Dmx
Move-in Black
Blackdelay
DMX control reset
DMX cannot control reset
Reset control
Reset
Display setting
• Press the MENU button and select, via the directional buttons, the [ Intro ] menu choice, then press the
ENTER button to confirm the choice.
• Press the UP and DOWN buttons to select [ Display ] menu voice and confirm the choice by pressing the
ENTER button.
• Select a display mode [ 60close ] or [ Bright ].
When in the [ 60close ] setting, the display backlight will turn off after 60 seconds.
When in the [ Bright ] setting, the display backlight will stay on.
• Enter [ Use ] and set [ Yes ] to run the new setting.
Special function
• Press the MENU button, select the [ Special ] menu voice and press the ENTER button to confirm the choice.
• Select the parameter to be changed between [ Blackdelay ] and [ Reset ]; press the ENTER button to confirm.
• Set the desired parameter value using the UP and DOWN buttons and press the ENTER button to confirm
the setting.
• Press the MENU button to go back or wait 30 seconds for automatic exit from the menu.