Murska 1400S2X2, Руководство по эксплуатации, Страница: 25 / 56

24
DAILY MAINTENANCE
Switch off all power to the machine before any maintenance.
Carry out these checks daily during the season.
Check the Belts
The Auger Belts has pulley tensioner, the Feeder Belts are spring loaded. Replace worn out belts.
Check the Elevator Chain
When the Elevator is in vertical position, the Chain can be checked through the Auger
Access Hatch. Sideways movement should be possible on the sprocket.
Too high chain tension will damage the chain tensioner unit.
Check the Hopper Bolts
Check the Hopper Bolts and Nuts every day, in order to avoid the bolts dropping on to
the Rollers.
Lubricate the Bearings
When the machine is in constant use, the bearings require a minimum of two strokes
of grease gun daily.
Check the Drive Pulleys
Check for tightness of Allen screws and alignment.
Check the Rollers
Alignment should be checked and adjusted if necessary. Also check for any signs of
over-heating.
Clean the Auger
Remove Bottom Auger pan-tray to clean at end of day to minimise contamination of
feed and to minimise any possible corrosion.