Murrplastik mp-IM1, Руководство по эксплуатации

Страница: 24 / 40

24
9 Direct connection via network cable
The following example describes the direct connection of a
Windows® 10 PC with an mp-IM1. For other Windows® operating
systems, the procedure may differ slightly. The listed IP address and
subnet mask shown here are examples. Rudimentary network
knowledge must be available. The IP address must be provided by the
customer's network administrator.
It is also possible to integrate the mp-IM1 into an existing company
network. Due to the complexity and potential risks, this setup is the
sole responsibility of the customer's network administrator.
9.1 Configuring network settings on the PC
Connect the mp-IM1 to the PC using a network cable.
In Windows®, open Control Panel and go to [Control Panel] -
[Network and Internet] - [Network Connections] .
Click on the Ethernet network with the right mouse button.