Murray mulcher 20-inch Push Скачать руководство пользователя страница 10

STEPS TO FOLLOW

10

F-050406L

BEFORE MOWING   

D

Be sure to dress correctly. Wear hard shoes, not sandals or tennis shoes.

D

Examine the blade. A blade that is bent, cracked, or damaged must be replaced with a factory

replacement blade.

D

Fill the fuel tank outside. Clean off spilled fuel.

D

Read and follow the Owner’s Manual, the instructions with the engine, and the instructions with

any attachments. Owner’s Manual instructions are for your safety and the safety of others.

D

Exhaust fumes are dangerous. Start the engine outside.

D

Make sure all safety devices are in place and working correctly.

D

Operation of the mower is only for a person that has experience.

D

Wet grass can be dangerous. Let the grass dry.

D

Instruct children and others to keep away from the work area.

D

Never cut the grass without good light.

D

Pick up loose objects. Remove them from the mowing area.

WHILE MOWING

D

Watch for fixed objects and avoid them. They can damage the mower or cause injury.

D

A hot engine and muffler will cause a burn. Do not touch.

D

Inclines and slopes must be carefully mowed. See the “Guide” in the back of this book to check

a slope.

D

Lack of daylight or good artificial light is cause to stop mowing.

D

Examine the mower, the blade, and other parts for damage after hitting a foreign object or if the

unit vibrates excessively.

D

Do not make adjustments or repairs without stopping the engine (except for carburetor). Dis-

connect the spark plug wire.

D

On or near roads, watch out for traffic. Direct discharge away from roads.

D

When mowing, avoid areas where traction is unsure.  Before and while moving backwards, look

behind and down for small children.

D

In heavy grass, raise the cutting height. Cut slower. Stop the engine to remove clogged grass

from the mower.

D

Never remove any safety related parts.

D

Do not pour gasoline into a engine that is hot or running.

AFTER MOWING

D

Always let the mower cool before storing in an enclosed area.

D

Foreign material on the mower is dangerous. Clean off grass, leaves, grease and oil before

storing.

D

Tighten all loose nuts, bolts and screws before you use the unit.

D

Empty and clean any grass catcher or other accessory.

D

Remove the key or disconnect the spark plug wire to prevent unauthorized use.

D

Make sure the mower is not kept near a source of ignition. Gas fumes can cause an explosion.

D

Only original parts or factory approved substitutes can be used to service the mower.

D

When storing the mower for an extended period, remove the fuel from the fuel tank.

D

Instruct children to leave the mower alone. It is not a toy.

D

Never keep gasoline near a source of ignition. Always use an approved container. Keep

gasoline away from children.

D

Lubricate according to the Instruction Book. See “Lubrication”.

IMPORTANT--Read  the Instruction Book. Keep this book for future use and

reference.

WARNING: 

Look for this symbol to point out important

safety precautions. It means: “Attention! Become

Alert! Your Safety Is Involved.”

Содержание mulcher 20-inch Push





























Отзывы: