Murray FT6000X92A Скачать руководство пользователя страница 4

4

F041303L

WARRANTY

Thank You . . .

for purchasing an Murray front tine rototiller. We guarantee that this front tine rototiller conforms to applicable North
American safety standards, and have worked to ensure that it will meet your exacting standards for usability and
durability. With proper care, your rototiller will provide many years of service.

Please take time to read this manual carefully to learn how to operate and service your rototiller correctly. Failure

to do so could result in personal injury or equipment damage. This manual should be considered a permanent part of
your rototiller. Congratulations on your investment in quality.

MURRAY, INC. 

Two Year Limited Warranty

TILLER PRODUCT  2 YEAR WARRANTY

Murray, Inc. warrants to the original purchaser that this unit shall be free from defects in material and workmanship

under normal use and service for a period of Two (2) Years from the date of purchase; however, this warranty does

not  cover  Normal  Wear  Parts  (except  as  noted  below)  or  engines,  accessories,  transmissions,  and  transaxles

supplied through other companies that furnish their own warranties and provide service through their authorized

field  service  facilities.  For  additional  information,  see  the  warranties  covering  these  particular  parts.  If  you  are

uncertain whether your unit contains or is equipped with one or more of these parts, consult your dealer prior to

purchase.  Subject  to  the  terms  and  conditions  noted  in  this  Limited  Warranty,  we  shall,  at  our  option,  repair  or

replace  at  no  cost  to  the  original  purchaser  any  part  covered  by  this  Limited  Warranty  during  the  applicable

warranty period.

Normal  Wear  Parts  are  defined  as  belts,  tines,  pulley  adapters,  wheels,  and  pneumatic  tires.  These  parts  are

warranted to be free from defects in material and workmanship as delivered with the product. Any claim for repair

or replacement of Normal Wear Parts must be made within thirty (30) days of the date of purchase. No claims involving

damage  caused  from  material  use,  abuse  or  misuse  will  be  honored.

This 

Murray, Inc. Two (2) Year Limited Warranty 

is your exclusive remedy; however, this warranty is void or does

not apply to any unit that has been tampered with, altered, misused, abused or used for rental or other commercial

and/or professional (non–homeowner) uses. Your warranty does not cover minor mechanical adjustments which

are not due to any defect in material or workmanship. For assistance in making such adjustments, consult your

Instruction  Book.

To make a claim under this 

Murray, Inc. Two (2) Year Limited Warranty

, return the unit (or if authorized in advance,

the defective part) along with your proof of purchase to an Authorized Service Center near you. To locate the nearest

Authorized Service Center, call the Central Parts Distributor for your area shown in the list provided with your unit

or check the Yellow Page listings in your local telephone directory. If you return the entire unit, we will repair the unit.

If we authorize the return of the defective part only, we will either replace or repair the part. In the case of a defect in

a  transmission  or  differential  (as  distinguished  from  a  transaxle),  the  entire  transmission  or  differential  must  be

returned since they do not include user serviceable parts.

This 

Murray, Inc. Two (2) Year Limited Warranty 

gives you specific legal rights, and you may also have other rights

which vary from state to state. 

This Limited Warranty is given in lieu of all other expressed and implied warranties

including the implied warranty of merchantability and warranty of fitness for a particular purpose. 

If you need

additional information on this written warranty or assistance in obtaining service, write or call:

MURRAY, INC.

Outdoor  Power  Equipment

Customer  Service  Department

P.O. Box 268; Brentwood, Tennessee 37024–0268

1–800–251–8007

Содержание FT6000X92A





























Отзывы: