Murray 620000x30C, Руководство пользователя

Страница: 14 / 52

MAINTENANCE
14
F–011013M
CUSTOMER RESPONSIBILITIES
SERVICE RECORDS
Fill in dates as you
complete regular service.
Before
Each
Use
After
First
12
Hours
As
Needed
Before
Storage
Begin
Each
Season
SERVICE
DATES
Tighten All Screws & Nuts
√ √
Check Drive Belts
√
Lubricate Chute Control Flange
√
GENERAL RECOMMENDATIONS
The warranty on this snow thrower does not
cover items that have been subjected to op-
erator abuse or negligence. To receive full
value from the warranty, the operator must
maintain the snow thrower as instructed in
this manual.
Some adjustments will need to be made pe-
riodically to properly maintain your snow
thrower.
All adjustments in the Service and Adjust-
ments section of this manual should be
checked at least once each season.
AFTER FIRST USE
.
Check for any loose or damaged parts
after each use.
.
Tighten any loose fasteners.
AFTER EACH USE
.
Run the machine to clear the auger of
snow.
.
Remove all snow and slush from the
snow thrower to prevent freezing of au-
ger or controls.
LUBRICATION – AS REQUIRED
.
Lubricate the flange on the discharge
chute before storage.
.
See Lubrication Chart diagram for lu-
brication points and type of lubricant.
Figure 9
Lubricate chute control flange.
Remove discharge chute and
coat flange with a clinging type
grease such as Lubriplate.
LUBRICATION CHART