manualshive.com logo in svg

Murray 465306x8B, Руководство пользователя, Страница: 14 / 56

Поделиться
Скачать
Murray 465306x8B Скачать руководство пользователя страница 14

OPERATION

14

F-050712L

Figure 4

Throttle Control

Lever

Blade Rotation

Control

Lift 

Lever

Speed

Control

Pedal

Shift

 Lever

Clutch/Brake

Pedal

LOCATION OF CONTROLS

BLADE ROTATION CONTROL: 

Use the blade rotation

control to start and stop the rotation of the blades and also to control
various accessories, such as a snow thrower.

CLUTCH / BRAKE PEDAL: 

The pedal has two functions.

The first function is a clutch. The second function is a brake. Use the
brake pedal to quickly stop the forward or reverse motion of the unit.

BRAKE PEDAL: 

Use the brake pedal to quickly stop.

HEADLIGHT SWITCH: 

There

 

 is not a separate headlight

switch. As with many newer automobiles, the headlights are auto-
matically on whenever the engine runs.

IGNITION KEY SWITCH: 

 Use the ignition key switch to

start and stop the engine. When you start the engine and release the
ignition key, the ignition key switch will automatically default to the
recommended RUN-MOW position for normal mowing.

SHIFT LEVER: 

Use the shift lever to change the speed and the

direction of the unit.

AUTOMATIC DRIVE DISCONNECT: 

 Use the auto-

matic drive disconnect, located under the seat, to disengage the
transmission.

LIFT LEVER: 

Use the lift lever to change the height of cut.

PARKING BRAKE LEVER: 

Use the parking brake lever

to engage the brake when you leave the unit.

SPEED CONTROL PEDAL: 

Use the speed control pedal

to change the speed and the direction of the unit.

SPEED CONTROL PEDAL: 

Use the speed control pedal

to change the speed of the unit.

THROTTLE CONTROL LEVER: 

Use the throttle control

lever to increase or decrease the speed of the engine.

Содержание 465306x8B

























































Отзывы:

Нет отзывов