Murray 309000x8B Скачать руководство пользователя страница 6

SAFE MOWING GUIDE

6

F-040604L

mower was completely assembled at the

store, you must still check the mower

according to the assembly instructions.

Make sure the mower is correctly

assembled and that all fasteners are tight.

Make sure the engine has the correct

amount of oil. Check these items often

during the life of the mower.
Your mower has a gasoline engine.

Gasoline is a dangerous fuel. Keep

gasoline only in an approved safety

gasoline container. Do not keep large

amounts of gasoline. When you add

gasoline to the fuel tank, do not smoke.

Store the gasoline container and the

mower in an area that has good ventilation.

Also, keep the gasoline away from any

flames like the pilot light of a furnace or

any other source of ignition. If the mower is

to be stored for more than a few weeks,

remove the gasoline from the fuel tank.

When inside an enclosure, do not add

gasoline to the fuel tank. Before you add

gasoline, move the mower outside and add

gasoline carefully. Before you start the

engine, remove any gasoline from the

outside of the fuel tank or from the mower.

Warm gasoline will expand. Leave some

space in the fuel tank for the gasoline to

expand. Also, the fuel cap has a vent hole

for fuel vapors. Always use the correct fuel

cap. Failure to follow safety rules about

gasoline will cause fires and explosions,

injury to you and damage to the equipment

and other property.

If you add gasoline to an engine that is

running or hot, the result can be an

explosion. Before you add gasoline, stop

the engine and let the engine cool for

several minutes. Remove dry grass and

other debris from the mower. Keep the

mower clean to improve the performance,

help the engine and transmission run

cooler, extend the life of moving parts, and

decrease the danger of a fire.
Fires and explosions are not the only

dangers when working around a mower.

The engine, transmission, and the muffler

will get hot in several minutes when the

engine is running. Do not touch these parts

of the mower. Stop the engine. Let the

engine and transmission cool before

servicing the mower. Remember, exhaust

fumes are dangerous. Never operate the

engine inside a building.
When you get a new mower, it can be a

new experience for the family. Tell each

person how a mower can be dangerous.

Remember, a mower is not a toy. A mower

is not to be used by children or anyone not

old enough, strong enough or that does not

have experience.
If the mower is not correctly assembled,

not operated correctly, or not regularly

serviced, the mower can be dangerous.

The most important rule to follow is always

use good judgement and common sense.

Mow safely and carefully.
Your mower will easily cut thick grass.

Fingers, feet and other parts can also be

cut by the blade. Injuries occur when the

operator does not think and reaches into

the chute opening. Always operate the

mower as if the blade is rotating. Do not

service or make an adjustment, except to

the carburetor, while the engine is running.

Use only accessories that are factory

approved for your mower. The wrong

accessory can decrease the safety of the

mower and can even damage the unit.

Read and follow the instructions included

with the accessory and the mower.
Use only original equipment or

replacement parts that are factory

approved for service. If you need service,

select an Authorized Service Center for

your mower. If you do the work on the unit,

follow the instructions in the Instruction

Book.    

When you mow, remember that children

are attracted to the mower. Always use

caution when mowing around obstacles

like trees or shrubs or when moving

backward. Only mow in a forward direction

if possible. Your visibility is decreased

when you mow backward. Also, the blades

are made to cut while the unit is moving

forward. If you mow backward, the cutting

performance decreases.     

Before you leave the mower, stop the

engine. Remove the key. Disengage and

lower any attachment. Set the parking

brake. Never mount or dismount from the

seat while the engine is running. An

accident can occur if you touch the brake,

shift lever, throttle, clutch or blade control

while the engine is running.  Mount and

dismount from the seat on the side of the

unit that is marked ENTER-EXIT.    

Make sure you are in good condition when

you mow. When you mow for several hours

your reflexes will decrease and your mind

will not be as alert. Take a short break or

an accident can occur. If the temperature is

hot, use caution to prevent dehydration. If

you are tired, angry or not completely alert,

do not operate the mower. If you use

alcohol, medication or drugs, do not use

the mower or any type of power

equipment.
Engine speed is a key to safe mowing and

to a good looking lawn. The maximum

speed of the engine was set at the factory.

Do not change the setting of the engine

governor.
Select the maximum engine and ground

speed that is right for the terrain and the

height of the grass. The blade cuts best

when the engine is operating at maximum

speed. The engine and transmission will

also run cooler at maximum engine speed.

Содержание 309000x8B





















































Отзывы: