manualshive.com logo in svg

Murphy PowerView PV1000, Руководство по эксплуатации

Поделиться
Скачать
Murphy PowerView PV1000 Скачать руководство пользователя страница 38

 

Section 78 

 

00-02-0619 

01-22-08 - 

34 -

 

Reprogramming the PV1000 Display 

The SD card slot on the front of the unit is used for reprogramming the unit.  

 

If you have been asked to create the card to reprogram the unit, you should: 

1. Insert card into reader/writer. 

2.  Unzip the file provided into a directory on the PC. 

3.  Format the card to erase all current files residing on the card. 

4.  Copy all of the files in the directory to the SD card.  Copy only the files to the card, not 

the directory or the zip file. 

5.  Remove card and place into display for programming. 

The following steps guide you through using the SD card slot to reprogram your PowerView 
unit. 

1.  Turn off power to the display. 

2.  Carefully remove the slot cover. 

3.  Insert the SD card into the slot until it locks in. 

4.  The power should be turned on. 

5.  A screen will appear prompting you to reprogram the unit.  Select “INSTALL” to 

continue.  It will take about 6-8 minutes to reprogram the unit. 

6.  When done, remove the card from the slot and replace the cover. 

7.  Restart the power.  The new software should be installed and available. 

Содержание PowerView PV1000












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды