• DC Voltmeter*
• DC Ammeter*
• Hourmeter*
• Relays. 4 relays, wired for Preheat, Crank, Fuel, and Common Alarm
• Keyswitch
• Phase select switch, standard for 3-phase units, optional for single-
phase units.
• Emergency stop switch
• NEMA-4X enclosure
• Quick disconnect connectors
• Hinged front panel
• Magnetic pickup sensor
• CT’s (current transformers)
• User connections
• If the Quick Disconnect option is selected, two quick disconnect con-
nectors are provided on the rear of the enclosure, mating connectors
with 12 ft. (3.658 m) tagged leads are available.
• If the Quick Disconnect option is not selected, grommeted holes are
provided for user’s cable entry. Connections via spade lugs will be
made to standard terminal blocks inside the MGC2000 enclosure.
Booted type grommets for a tight seal are available.
* The MGC2000 enclosure has provisions for two extra instruments only,
these two instruments can be selected in any combination.
MGC2000 System Options
MGC-02029B page 3 of 4
13-31/32 in.
(355 mm)
5/16 x 1/2 in. (8 x 13 mm)
Mounting Holes, 4-Places
10-5/8 in.
(270 mm)
18-63/64 in.
(480 mm)
18-1/2 in.
(470 mm)
kPa
PSI
50
75
100
0
0
25
350
700
kPa
PSI
50
75
100
0
0
25
350
700
QUARTZ
HOURS
kPa
PSI
50
75
100
0
0
25
350
700
OFF/
STOP
REMOTE START
DEMAND
OVERCRANK
ENGINE RUNNING
LOW OIL
PRESSURE
BATTERY
CHARGER FAIL
A-C
VOLTS
A-C
AMPERES
HERTZ
HIGH ENGINE
TEMPERATURE
PLANT FAIL/
AUXILIARY INPUT
OVERSPEED
MANUAL
START
AUTO
START
OFF
1
MGC
Panel
MOUNTING
DETAIL
Nut
MGC
Panel
Wall or
Pedestal
Screw
Wall or
Pedestal
Lock
Washer
Washer
Washer
NEMA 4X Type Enclosure Dimensions
WARNING: Do not bundle AC and DC wiring together. It is required
to use separate conduit runs and keep apart by at least 2 inches.
