ROUGHING-IN AND DIMENSIONAL DRAWING
Prior to roughing consult with local, state, and federal codes for proper mounting height.
4.
WARNING: Warranty is voided if installation is not made following current Acorn Aqua installation
instructions and if components are assembled to the fixture that are not approved by Acorn Aqua.
5. Fixture operates within water pressure range of 20 to 105 psig. Acorn Aqua will not warranty fixtures
damaged when connected to supply lines with flow pressure lower that 20 psig or higher than 105
psig. A pressure regulator must be furnished by others on supply line if inlet pressure is greater than
105 psig.
3. Completely flush supply lines of all foreign debris before connecting to fixture. Optional water filter is
available should there be problems from the water supply with taste, odor, color, or sediment.
2.
Water supply is 1/2” male NPSM (Cuspidor) & 3/8” copper tube (Fountain). See Figure “D”. Waste is
1-1/4” OD female slip joint connection.
IMPORTANT:
1.
Waste P-Trap and Water Supply Service Stop Valve to be supplied by others in accordance with
local codes.
GENERAL NOTES:
1. ALL DIMENSIONS ARE IN INCHES.
*2. DIMENSIONS SHOWN ARE FOR RECOMMENDED ADULT HEIGHT. ADJUST VERTICAL
DIMENSIONS AS NECESSARY TO COMPLY WITH FEDERAL, STATE, & LOCAL CODES.
3. STOP VALVE NOT PROVIDED.
1
3
8
"
31
1
8
"
*41
1
8
"
25
1
2
"
22" - 40"
9
1
2
"
6"
2"
(4) Ø
1
8
" MTG
HOLES
35"
CUSPIDOR
ACCESS
PANEL
4
7
8
"
3/8" O.D.
COPPER TUBING
CHILLER
UNIT
SUPPLIED MOUNTING
FRAME
12"
WALL
OPENING
17" WALL
OPENING
(2) 1-1/4" OD SLIP
JOINT WASTE
CONNECTION
54
1
2
"
WALL
OPENING
36
5
8
"
WASTE
&
SUPPLY
5
8
"
10
7
8
"
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
DRINKING FOUNTAINS
A481.8
Page 2 of 6
Revised:
07/25/18
7020-100-001
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
*
*
