Configuring the fax settings> 29
C
ONFIGURING
THE
FAX
SETTINGS
B
ASIC
SETUP
Minimum configuration requirements;
a PSTN telephone line connection.
If you wish to connect an external telephone or answering machine, refer to
“Adding a
telephone handset” on page 32
.
Your MFP has to be set up properly to allow faxing from the machine. The following
parameters
must
be set before using the fax function:
>
Date and time
>
Local fax number
>
Sender ID
There are other parameters that can be adjusted to suit your personal preferences later if
required, refer to fax set up table for details (See
“Advanced set up” on page 30
).
To set fax parameters:
1.
Press the
SETTING
button on the control panel.
2.
Using the
Down
arrow key, scroll to
Easy Setup
and press
OK
.
3.
Using the arrow keys and on-screen keypad, enter the Administrator password.
Highlight
Done
and press
OK
.
4.
Press the
Right
arrow key to select
Date/Time Setting
.
5.
Using the arrow keys, select the correct time zone and press
OK
.
6.
Using the arrow keys, select the correct daylight saving option and press
OK
.
7.
Press
OK
to select
Manual
.
8.
Using the arrow keys, enter today’s date.
9.
Press
OK
.
10.
Using the arrow keys, enter the correct time.
11.
Press
OK
.
12.
Using the
Down
arrow key and scroll to
Fax Setting
then press
Right
arrow key.
13.
Press the
Right
arrow key to select
Fax Number
.
14.
Using the keypad and on screen options enter the fax number for this MFP.
15.
Highlight
Done
and press
OK
.
NOTE
If you ran the
Muratec
driver installer program from the DVD-ROM you may have
already set the time zone, date and time via the Panel Language Setup utility.
NOTE
The default password is “aaaaaa”.
NOTE
Use the Right and Left arrow keys to move between digits.
NOTE
Use the Right and Left arrow keys to move between digits.
Содержание MFX-C2700
Страница 1: ...Muratec MFX C2700 Configuration Guide...