5-5
Network Interface
5.4.2 e-mail environment settings
These are important settings that allow the system to send and receive
e-mail. Please consult your system operator and/or network administrator
before entering these settings. Entering improper settings can prevent system
operation and may cause lost or delayed mail.
1
On you machine’s control panel, press [Menu], [6], [2].
[Program] No.62_
2 Mail Environment
2
Press [Enter].
[Program] No.6201
01 Name
3
Press [
] or [ ]
to select the desired parameter and press [Enter].
For example, SMTP server settings:
[Program] No.6203
03 SMTP Server
4
Press [Enter].
SMTP Server;Lower
_
5
Use the numeric keys to enter the SMTP server IP Address or SMTP
server name and press [Enter].
The Port No. setting display will appear.
6
Use the numeric keys to enter the port number and press [Enter].
Normally, set to “25”.
Port No.(25)
(00000-65535) 00025
7
For some providers, POP authentication is required before sending (send
request to SMTP server). In this case, set to on.
POP before SMTP :Off
/
/Enter
8
Press [Enter]. To set other parameter go back to step 3. To return to
standby, press [Reset].
Содержание MFX-1930
