Murata SCA11H, Примечание к применению

Страница: 5 / 20

5 (20)
Murata Electronics Oy SCA11H Doc.No. 2077
www.murata.com Rev. 3
2.3 Cloud communication mode
In cloud communication mode SCA11H connects to the pre-defined WiFi network and
sends data to pre-defined server.

Communication parameters can be set through the configuration mode.

SCA11H sensor node sends data to the server as HTTP POST message. HTPP
POST body contains XML-formatted BCG data according to Product Specification
1325 SCA11H cloud server interface specification .

Simple Service Discovery Protocol SSDP is used for device discovery.

Sensor node can be calibrated and maintained using the HTTP API according to
Product Specification 1424 SCA11H Hostless WLAN HTTP API Specification .
3 SCA11H user interface
After initialization with the attachment plate LEDs on the top indicate the following
functions:
1. Power (green)

Blinking: connecting to network

Static on: connected to network
2. Network (orange)

Flash: network traffic (transmission or reception)
3. Status (green)

Flash: BCG data transmission
After initialization without the attachment plate (approx. 10s) LEDs indicate the following
functions:
1. Power (green)

Blinking: configuration mode
2. Network (orange)

Flash: network traffic (transmission or reception)
3. Status (green)

Off
Figure 3. SCA11H User Interface