PE43650
Evaluation Kit (EVK) User’s Manual
Page 14
DOC-90611-1 – (06/2019)
Continuous Pattern Loop
Click the Continuous Pattern Loop check box to step through each of the attenuation states. The pause interval
can be specified in seconds to adjust the time in between sending each pattern.
Attenuation Value
The Attenuation Value box displays the attenuation value the DSA is currently programmed to. Type the desired
attenuation value and then click “Enter” key to program the DSA.
Attenuation Slide Bar
The attenuation slide bar in the center of the GUI allows the user to quickly select the desired attenuation. Use
the mouse to drag the red rectangle to the desired setting. The red arrows at the top and bottom can be clicked
to increase or decrease attenuation state at the minimum step size.
Figure 20 • Latched Parallel and Serial Mode GUI Features
Figure 21 • Continuous Pattern Loop Settings
Figure 22 • Attenuation Value
