©2010-2014 by Murata Electronics N.A., Inc.
DNT900DK (R) 11/3/14
Page 3 of 4
www.murata.com
7. The DNT Demo utility program is located in the PC Programs folder on the kit CD. The DNT Demo requires no
installation and can be simply copied to the PC and run. Start the Demo on the PC. The Demo start-up window is
shown in Figure 5.
8. Click on Connect to open the Select Comm Port Settings dialog box, as shown in Figure 6. Set the baud rate to
9.6 kb/s. Set the CommPort to match the serial port connected to the Base, either the hardware port or the USB virtual
serial port. Then click OK to activate the serial connection.
Figure 5