© Munters AB, 2013
16
Installation
Chapter5
Chain suspension
fig.8
If the fan is used as a circulator chains should be
fixed to the M8 eyebolts previously installed on the
extremity of the lateral sides by the threaded M8
bushes.
fig.9
Wall/column mounting system
fig.10
VERTICAL TILTING
1. Loosen both the bottom bolts (it is not necessary
to remove the bolts completely from the fan).
2. Tilt the fan to the desired angle.
3. Fasten the two bolts from the step 1.
fig.11
HORIZONTAL TILTING
1. Loosen side bolts (it is not necessary to remove
the bolts completely from the support).
2. Tilt the fan to the desired angle.
3. Fasten the bolts from the step 1.
30°
30°
1
2
1
2
