© Munters AB, 2019
8
3.3
Connecting the Comm-Box to the Internet
•
Connect the Comm-Box to your Internet connection/modem.
If required, connect a screen, keyboard, or mouse to the Comm-Box (via the USB/HDMI ports).
The only step in installing a Comm-Box that requires wiring is if the Comm-Box is connected directly to a
controller (instead of to a communication unit). In this situation the Comm-Box must be wired to the
controller communication card.
WARNING!
Disconnect the power before beginning!
WARNING!
Only an authorized electrical technician may perform this procedure!
•
Controller to Junction Box Wiring
•