© Munters AB, 2017
18
•
Farm Name: This is the name that appears on your screen.
•
Connect/Disconnect: This function enables disconnect from the current farm from the internet
and reconnecting it via the Log-in screen (refer to Log In, page 13).
NOTE
This function only appears on screens locally connected to the Comm-Box.
•
Farm Type: Poultry or Pigs. Make sure that the definition matches the Comm-Box type!
•
Baud rate: This rate must be the same throughout the network.
•
Com Port
•
Contact information (optional): This information will be used by Munters to contact users if
there is a need; for example to inform you of an update. The information will not be distributed
to any outside parties what so ever.
•
Number of Houses to be Scanned: Scanning tests communication to the houses. If you wish
to scan all houses or individual houses, click the relevant house number. Click Rescan farm
houses to complete the scan.
o
You can name the houses.
o
In units having the Comm-Box Pig Software, you can name individual rooms.
•
Click Save Changes.
•
System Update: Refer to Software Upgrade.
5.1.1.2
Push Notifications
Comm-Box can send push notifications to multiple email addresses. These emails list any current alarms.
•
Enter an address, click Check, Add, and then Save.
WARNING!
The Comm-Box Push Notification system does not provide detailed alarm information.
The system is indicative only. To receive real-time alarms along with the ability to configure and
manage alarms, contact your dealer about an independent alarms system (for example the
Communicator).
