mundoclima ALL IN ONE Type Air-source Heat Pump Water Heater, Инструкция по установке и эксплуатации

Страница: 12 / 22

8
Installation & Owner‘s Manual
CAUTION
CAUTION
After powered on, the display lights up. Users can operate the unit through the buttons
under the display for different modes
Emptying: If the unit needs cleaning, moving etc, the tank should be emptied.
Method: See
Fig.8-2:
8.1 Operation steps
8. OPERATING INSTRUCTION
Fig.8-2
Operation without water in water tank may result in
damage of auxiliary e-heater. Due to such damage, the
supplier is not responsible for the quality issue.
Over 50
℃
may result in serious burn or so caused death.
Special care should be paid to the children, the disabled and
the old in case of water burn.
Water Affusion
Hot water outlet
Close
Water out
When water flows out from the water
outlet, the tank is full. Turn off the hot
water outlet valve and water affusion
is finished.
Open
Open the cool water inlet and
hot water outlet
Cool water inlet
Hot water outlet
Open
Fig.8-1
Emptying
Close
Open
Drainpipe
Open
Cool water inlet
Close the cool water inlet, open the hot
water outlet and open drainpipe.
Hot water outlet
Drainpipe
Close
After emptying, please replace the nut of
drainpipe.
Before using this unit, please follow the steps below.
Water Affusion: If the unit is used for the first time or used again after emptying the tank, please make sure that the
tank is full of water before turning on the power.
Method: see
Fig.7-1