MUND CLIMA MUCH-20-H4, Руководство по эксплуатации, Страница: 23 / 43

Ducted Split Type Air-Conditioning
19
6. button*
There is no this function for this unit. If press this key, the main unit will click, but it also runs under original
status.
7.“SLEEP” button
Press this button to set the sleep mode. Once the sleep mode is set , the temperature will increase 1 after 1
hour, and still increase another 1 after 2 hours in the COOL mode. While in HEAT mode , the temperature will
decrease 1 after 1 hour, and still decrease another 1 after 2 hours .
8.“TIMER” button
Press the button to set the timing function. When the timing function is on, press this button to cancel the
function. When the timing function is off, press this button once, words Hour on(off) will appear and flicker.
In this case, press +/- button to adjust time (press +/- button continuously to change timing value quickly),the
setting time range is from 0.5 to 24 hr; press this key once again to fix the time, then remote controller will send
out the signal immediately and hour on/off will stop flickering. If the time of that no press timer button under
filcking status is above 5s, the timer setting will quit. If the timer has been set, press this button once again to
quit it.
9.“TURBO” button
Set turbo on or off(the characters of turbo will appear of disappear) by pressing this key under cooling or
heating mode. Once energized, the unit will be defalted to be turbo off. This function can not be set under auto,
dehumidify or fan mode, and characters of turbo won’t appear.
10.“BLOW” button
Set Blow on or off (the characters of Blow will appear of disappear) by pressing this key under cooling
or dehumidify mode. Once energized, the unit will be defaulted to be Blow off. Set E-Heater on or off (the
characters of E-Heater will appear of disappear) by pressing this key under heat mode. Once energized, the
unit will be defalted to be E-Heater off. Blow and E-Heater function can not be set under auto or fan mode, and
characters of Blow won’t appear.
11.“Light” button*
There is no this function for this unit. If press this key, the main unit will click, but it also runs under original
status.
12.“Temp” button*
There is no this function for this unit. If press this key, the main unit will click, but it also runs under original
status.
13.“HEALTH |SAVE” button*
There is no this function for this unit. If press this key, the main unit will click, but it also runs under
original status.
About AUTO RUN
When AUTO RUN mode is selected, the setting temperature will not be displayed on the LCD .The unit
will be accordance with the room temp, automatically to select the suitable running mode and to make ambient
comfortable.
About turbo function
If start this function, the unit will run at super-high speed to cool or heat quickly so that the ambient temp
approachs the preset temp as soon as possible.
About LOCK
Press “+” and “–” simultaneously to lock or unlock the keyboard. If the remote control is locked, the icon
will be displayed on the LCD, in which case, press any button , the mark will flicker for three times. If the
keyboard is unlocked, the mark will disappear.
About switch between Fahrenheit and Centigrade
Under status of unit off, press MODE and – buttons simultaneously to switch and .