IDS002 Easy Setup Guide
Figure 1- 2 Overview
Figure 1- 3 Display Interface
2.0. How to use the scanner
2.1. Before Scanning
1.2. Product Overview
1.3. Display Interface
Version 2.00
Page 3 of 7
IDS002 Easy Setup Guide
Version 2.00
Page 2 of 7
Indicator Menu Key
Mini USB Port SD Card Slot Reset Hole
Up / Format Key
Playback Key LCD Screen Down / Resolution Key
Battery Display
The serial number of
files in the inserted
SD card
JPG/PDF
：
Document format
saved after scanning
LO
(LOW 300DPI)
/
HI
(HIGH 600DPI)
/
FI
(FINE 1050DPI)
Setting
File View
Time Display Color Mode/Mono Mode
1 ) Make sure the device has enough power to
turn on, if the device does not have power,
please plug in the power cord to charge.
2) Check that the SD card is inserted into the
device, if no SD card is inserted into the device,
please insert SD card into SD card slot.
2.2. How to Start Scanning
1 ) Press the button and hold for 3 seconds
to turn on the scanner.
2) Put your target (document/photo/receipt/book)
on a flat desk, placing the scanner on the
position of target you want, press the button
to start scanning, when the document icon is
displayed on the LCD screen, slide the scanner
over the target smoothly and slowly.
Figure 2- 1 Document Scanning Mode
