D
ESK
S
TAND
I
NSTALLATION
20
Desk Stand Installation
The MultiTaction Cell comes with a pair of desk stands. Desk stands are
intended for safe and stable installation when the Cell is to be located horizon-
tally or vertically on a sturdy desk or table.
CAUTION: Using a desk with too light structure, installing the
desk stands incorrectly or into an incorrect position causes a risk of
the Cell tipping over, property damage and personal injuries.
• To avoid the risk choose a desk with a heavy enough structure for
the installation, install the desk stands according to this manual and
ensure that desk will not tip after the installation.
T
ASK
1.
Choose a sturdy desk for the installation. Ensure the desk can bear the
weight load of the Cell (45 kg / 100 lbs) and that the desk will not tip
over when the Cell is installed.
2.
Depending on the installation direction (horizontal / vertical) place the
stands on the desk and attach them to it by the VESA M8 screws. Align
and attach the alignment rail bits (M5 screws). Do not place the stands
on the edge of the desk in order to minimize the risk of tipping.
