Multitone RPT500, Руководство по установке, Страница: 7 / 24

9261-8252 Issue 07
Description
Page 6
www.multitone.com
Where necessary, use additional protection e.g. armoured trunking, surge arrestors, especially on the
outside of buildings.
Where any interference problems are observed, it may be required to fit additional filtering
components such as ferrite absorbers, or in-line filters. If such action proves to be necessary, contact
either Multitone or their authorised agents.
Connection of Power Supplies
Use only power sources specified, or supplied by Multitone. The use of another device will invalidate
any declared conformity for this equipment, if as a result it ceases to conform to those standards on
which conformity is based.
The equipment should only be connected to a power supply as described in the operating instructions,
as marked on the equipment, or supplied by Multitone. Do not overload outlets and extension cords,
as this can result in fire, or electrical shock.
Where equipment has been provided with a three-wire grounding type plug, this plus will only fit a
grounding type power outlet. This is a safety feature and should not be defeated. If you are unable to
use a grounding outlet, contact your electrician.
Where equipment has been has been provided with a polarised line plug (one blade wider than the
other - US/Canada), this plug will only fit a power outlet one way. This is a safety feature and should
not be defeated. If you are unable to insert the plug fully, try reversing the plug. If the plug still does
not fit, contact your electrician to replace the obsolete outlet.
Servicing
This equipment contains non user-serviceable parts. All repairs to be undertaken by qualified service
personnel. In the case of a problem, please contact your service representative/agent.
All the safety and operating instructions should be read before the equipment is connected and
operated and retained for future reference. All warnings marked on the equipment should be strictly
adhered to. No attempt should be made to remove any designated safety covers, as these areas
contain voltages of a sufficient magnitude to constitute a risk of electric shock to personnel.