10
When you press the guard button and you will hear a voice prompt
“security” (only in
main pages);
When you press the
“#” or talk button and you will hear a voice prompt “calling” (only
in calling page);
When you unlock the card and you will hear a voice prompt
“door opened”.
◆
I
n [Engineering Password] setting page, you can set the engineering
password(the password is 4 digit).
◆
In [About] setting page, you can review the Block No. / Device Id and HW Ver.
Remark:
Door panel support only ID card.
In any setting page, you can press
“*” button to return to the previous setting
page.
The time & date of the first door panel will be synchronized to other device in
the system.
When you forget the engineering password, you can do the following
operation to restore to the default password: press the tamper button
“*”
button
tamper button
“#”
button (valid only on the main page and the
tamper alarm page; this operation must be completed within 3s)
.
6.4 Unlock Function
There are two unlock types as the follows:
>> Password unlock:
“#” button
Unlock password
“#” button;
>> Card unlock: When a user move the added card near the swipe card panel, the
door will be open.
Remark:
The password unlock function can be enabled/disabled in the access settings.
Swipe card distance
≤ 20mm.
