Multitech MultiVOIP MVP130-AV-FXS, Быстрый старт

Страница: 21 / 63

Phone/IP Starter Config.
21
MultiVOIP Quick Start Guide
Phone/IP Starter Configuration (continued)
12. Go to Save Setup | Save and Reboot . Click OK.
This will save the parameter values that you have
just entered.
The MultiVOIP’s “BOOT” LED will light up while
the configuration file is being saved and loaded into
the MultiVOIP. Don’t do anything to the
MultiVOIP until the “BOOT “LED is off (a loss of
power at this point could cause the MultiVOIP unit
to lose the configuration settings you have made).
END OF PROCEDURE.