Multitech MultiModem MT2834ZDX Series, Быстрый старт

Страница: 5 / 8

MT2834ZDX-Series Quick Start Guide
RS232 Connection
Plug one end of the serial cable into the RS232 connector on
the modem, and the other end into a serial port connector on
your computer, such as COM1 or COM2.
LINE Connection
Plug one end of the phone cable into the MT2834ZDX’s LINE
jack and the other end into a phone line wall jack.
Note: The LINE jack is not interchangeable with the PHONE
jack. Do not plug the phone into the LINE jack or the line cable
into the PHONE jack.
PHONE Connection
You may optionally plug a telephone into the PHONE jack. This
jack is provided as a convenience; you may also plug a
telephone into a duplex jack inserted into your wall jack.
POWER Connection
Plug the power supply module into an AC power outlet or power
strip. Plug the power supply’s cable into the POWER jack on
the modem.
Note: Use only the power supply supplied with the
MT2834ZDX. Use of any other power supply will void the
warranty and could damage the modem.
Power-On Test
Test the modem by turning it on (a power on/off switch is
located on the right side). When you apply power, the modem
performs a diagnostic self-test, indicated by the speed
indicators flashing in sequence for a second or two, after which
the 28 indicator should light. If this does not happen, check that
the power switch is on, the power supply is solidly connected,
and the AC outlet is live. If these measures do not work, see
Chapter 4, “Troubleshooting” in your User Guide.
3