MultiModem II Quick Start Guide
5
Step 2 – Install the Modem Driver
If you use Windows 2000 or newer, you must install the modem driver.
The modem driver tells Windows how to control the modem. If you use a
Linux operating system, please refer to the User Guide for installation
instructions.
1.
With your computer turned off, ensure that your modem is
connected properly, and then turn on your computer. Upon
booting up the computer should detect the modem and open
Welcome to the Found New Hardware Wizard
screen. On this
screen, select
Install from a list or specific location
. Click
Next
.
2.
On the
Found New Hardware
Wizard screen, check
Search for
the best driver in these locations
and
Install from a specific
location
. Do
Not
click Next at this point.
3.
Insert the MultiModem product CD into your CD-ROM drive, when
the MultiModem main screen appears, click
Exit
. Now, click
Next
on the Found New Hardware screen.
4.
On the
Found New Hardware
Wizard screen, click on
Search for
the best driver in these locations
and
Search removable
media
. Click
Next
. Windows installs the modem driver.
5.
Click
Finish
to exit.
Step 3 - Setting Your Country or
Region Code
The MT5600BA-V92 modem is a global modem - it can be used all over
the world.
However, countries or regions vary in their requirements for how a
modem functions. Therefore, you must configure yours to match the
defaults of the country or region in which you are using it. Choose from
any of the three methods:
•
Using the LCD Panel to Set Your Country or Region Code
•
Using the Global Wizard to Set Your Country or Region Code
•
Using AT Commands to Set Your Country or Region Code – Refer
to the User Guide
electronic components distributor
