Appendix A – Regulatory Information
28
Multi-Tech Systems, Inc. MT9234MU-CDC User Guide (S000470A)
Restriction of the Use of Hazardous Substances (RoHS)
Multi-Tech Systems, Inc.
Certificate of Compliance
2011/65/EU
Multi-Tech Systems confirms that its embedded products comply with the chemical concentration
limitations set forth in the directive 2011/65/EU of the European Parliament (Restriction of the use of
certain Hazardous Substances in electrical and electronic equipment - RoHS)
These Multi-Tech products do not contain the following banned chemicals
1
:
●
Lead, [Pb] < 1000 PPM
●
Mercury, [Hg] < 1000 PPM
●
Hexavalent Chromium, [Cr+6] < 1000 PPM
●
Cadmium, [Cd] < 100 PPM
●
Polybrominated Biphenyl, [PBB] < 1000 PPM
●
Polybrominated Diphenyl Ether, [PBDE] < 1000 PPM
Environmental considerations:
●
Moisture Sensitivity Level (MSL) =1
●
Maximum Soldering temperature = 260C (in SMT reflow oven)
1
Lead usage in some components is exempted by the following RoHS annex, therefore higher lead
concentration would be found in some modules (>1000 PPM);
–Resistors containing lead in a glass or ceramic matrix compound.
REACH Statement
Registration of Substances:
After careful review of the legislation and specifically the definition of an “article” as defined in EC
Regulation 1907/2006, Title II, Chapter 1, Article 7.1(a)(b), it is our current view Multi-Tech Systems, Inc.
products would be considered as “articles”. In light of the definition in § 7.1(b) which requires
registration of an article only if it contains a regulated substance that “is intended to be released under
normal or reasonable foreseeable conditions of use,” our analysis is that Multi-Tech Systems, Inc.
products constitute nonregisterable articles for their intended and anticipated use.
Substances of Very High Concern (SVHC)
Per the candidate list of Substances of Very high Concern (SVHC) published October 28, 2008 we have
reviewed these substances and certify the Multi-Tech Systems, Inc. products are compliant per the EU
“REACH” requirements of less than 0.1% (w/w) for each substance. If new SVHC candidates are
published by the European Chemicals Agency, and relevant substances have been confirmed, that
exceeds greater than 0.1% (w/w), Multi-Tech Systems, Inc. will provide updated compliance status.
Multi-Tech Systems, Inc. also declares it has been duly diligent in ensuring that the products supplied are
compliant through a formalized process which includes collection and validation of materials
declarations and selective materials analysis where appropriate. This data is controlled as a part of a
formal quality system and will be made available upon request.