Multitech MultiMobile MT128ZLX-ST/NT, Быстрый старт

Страница: 29 / 39

MT128ZLX Quick Start 5: Windows 2000 Install
25
14. The ISDN Configuration wizard screen sequence (labeled ISDN –
Intelligent PCMCIA ISDN TA (Net)) begins.
NOTE: The information entered in the Microsoft ISDN Configuration
wizard does not affect the operation of the MT128ZLX.
However, completing this wizard is necessary to update
certain dial-up networking software components to add
ISDN functionality to Windows 2000. The MT128ZLX is
configured for use with the Configuration Utility that was
installed during driver installation. In the section
“Configuring the MT128ZLX” (presented later in this
chapter), you will supply setup information for using the
Configuration Utility program with your particular
computer.
The info entered in this screen sequence will be superseded.
Click Next> .
15. The next screen requests Phone Number and SPID information. Again,
this info will be superseded. Leave the fields on this screen blank. Click
Next> .
16. A completion screen appears. Click Finish .
17. You will be prompted to restart your computer. Click Yes . The driver
installation procedure is now complete. However, before you can use your
MT128ZLX in Windows 2000, it must be configured with SPIDs (in the
U.S. and Canada), telephone numbers, voice-encoding information, and
switch-type information. (See the procedure “Configuring the MT128ZLX
In Windows 2000” in the User Guide, P/N S0000154.)