CHAPTER 7 SETTING UP WIRELESS FEATURES
a.
From the
Encryption
drop-down list, select the encryption to be used.
b.
To generate a key from a phrase, in the
Passphrase
field, type a phrase. Click
Generate
.
c.
To manually enter keys, type the keys in the Key 1, Key 2, Key 3 or Key 4 fields.
3.
To configure WPA-PSK and WPA2-PSK:
a.
Select the WPA Algorithm from the drop-down list.
b.
In the
Shared Key
field, type the key that is used for encrypting and decrypting the data.
c.
To remove the mask characters, thereby making the Shared Key visible, check
Unmask
.
4.
When done, click
Submit
, then
Save and Restart
.
Viewing information about Wi-Fi clients using your wireless network
To view information about clients (such as computers, tablets, and smart phones) that are connected to your
router's Wi-Fi access point:
1.
The Clients group displays a list of clients using your router's WiFi.
2.
To update the list, click
Refresh
.
Setting Up Wi-Fi as WAN
To setup the router's WiFi as WAN:
1.
Go to
Wireless > Wi-Fi
to display the
Wi-Fi
window.
2.
From the
Wi-Fi Mode
drop down list, select
Wi-Fi as WAN
.
3.
Searching for available Wi-Fi networks starts automatically. After 30 to 60 seconds, a list of detected Wi-
Fi Access Points appears in the
Available Networks
group.
4.
In the
Available Wi-Fi Networks
group, click the SSID for the Wi-Fi access point you want to use. The
Add
Saved Network
window opens.
5.
Review the information, enter any required security info, then click
Finish
. The Wi-Fi access point you just
added appears in the
Saved Wi-Fi Networks
group.
6.
If desired, add additional access points to the list of Saved Networks. The router tries to connect to Saved
Networks in the order they are listed. You can change the order by clicking the up or down arrows shown
under
Options
.
7.
When finished, click
Save and Restart
. The Status field displays "Connected" if you have successfully
connected to the Wi-Fi access point.
Setting up Bluetooth
The Bluetooth-IP feature allows a data connection between a remote TCP/UDP client or server and a local
Bluetooth device. To set up the Bluetooth connection:
1.
Go to Wireless > Bluetooth
2.
To enable the feature, check
Enabled
. Click
Submit
.
3.
Confirm that the far-end Bluetooth device is powered on and waiting for a connection.
4.
In the
Available Devices
group, click
Refresh
. A list of detected Bluetooth devices appears.
5.
Click the name of the Bluetooth device that you want to use. The name and MAC address appear under
the selected device.
MultiConnect
®
rCell 100 MTR-H5 User Guide
39
