INSTALLING AND USING THE ROUTER
The following procedure shows the default behavior of the RESET button. You can program a different behavior if
needed.
You need:
■
A pin, paperclip, or similar thin object that can fit into the reset hole
To reset the device to factory default settings:
1.
Find the hole in the front panel labeled RESET. The reset button is recessed into the case.
2.
Use the pin to press and hold the reset button at least 5 seconds until the Status LED becomes solid.
3.
Release the button for the reset to complete
The device reboots.
Notice for Devices that Use Aeris Radios
One component of your device is a radio. A radio algorithm prevents your device from repeatedly attempting to
connect to the network when the radio:
■
Cannot establish a packet data connection or
■
Fails to access the application server.
When writing applications for your devices, ensure that your applications do not interfere with the radio's
connection retry algorithm. If you fail to do so, Aeris might block network access for your devices.
After your devices reach the end of their commercial lifespan, you must remove them from the Aeris network. To
do so, remove power from the devices and remove their antennas. If your devices continue to attempt to register
with the network after you cancel device subscriptions, Aeris can bill you for any traffic generated by those
devices.
MultiConnect
®
rCell 100 MTR-H5 User Guide
23
