Multitech MultiConnect MTPCIE-BW, Руководство разработчика

Страница: 83 / 88

BLUETOOTH DEVELOPER INFORMATION
MultiConnect
®
PCIe MTPCIE-H5/MTPCIE-BW Developer Guide 83
echo "Setting up iptables"
# Flush all the tables first
iptables -t filter -F
iptables -t nat -F
iptables -t mangle -F
iptables -t filter -P INPUT DROP
iptables -t filter -A INPUT -i lo -j ACCEPT
iptables -t filter -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
# accept all traffic from LAN
iptables -t filter -A INPUT -i eth0 -j ACCEPT
iptables -t filter -A INPUT -i wlan0 -j ACCEPT
iptables -t filter -P FORWARD DROP
iptables -t filter -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -t filter -A FORWARD -i eth0 -o ppp0 -j ACCEPT
iptables -t filter -A FORWARD -i wlan0 -o ppp0 -j ACCEPT
iptables -t filter -P OUTPUT ACCEPT
iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
# turn on packet forwarding last
echo 1 > /proc/sys/net/ipv4/ip_forward
Using an MT100EOCG with an MTPCIE Bluetooth/Wi-Fi Device as Wi-
Fi Client
To use the MT100EOCG with MTPCIE Bluetooth/Wi-Fi Device on the MTPCIE-DK1 as a Wi-Fi client:
1. On MT100EOCG, copy the file wpa_supplicant.conf.example to /var/config folder .
cp /etc/wpa_supplicant.conf.example
/var/config/wpa_supplicant.conf
2. Edit /var/config/wpa_mtechpc.conf and change AP_Name and AP_Password to values required by your
Wi-Fi network.
ctrl_interface=/var/run/wpa_supplicant
network={
ssid=" AP_Name "
scan_ssid=1
# key_mgmt=NONE
key_mgmt=WPA-PSK
psk=" AP_Password "
priority=1