ANTENNA AND ACTIVATION INFORMATION
16
MultiConnect
®
microCell MTCM-LAT3 and -LSP3 User Guide
Chapter 4 – Antenna and Activation Information
Notice regarding Compliance with FCC, EU, and Industry Canada
Requirements for RF Exposure
The antenna intended for use with this unit meets the requirements for mobile operating configurations and for
fixed mounted operations, as defined in 2.1091 of the FCC rules for satisfying RF exposure compliance. This device
also meets the European RF exposure requirements of EN 62311. If an alternate antenna is used, consult user
documentation for required antenna specifications.
Compliance of the device with the FCC, EU and IC rules regarding RF Exposure was established and is given with
the maximum antenna gain as specified above for a minimum distance of 20 cm between the devices radiating
structures (the antenna) and the body of users. Qualification for distances closer than 20 cm (portable operation)
would require re-certification.
Wireless devices could generate radiation. Other nearby electronic devices, like microwave ovens, may also
generate additional radiation to the user causing a higher level of RF exposure.
Antenna System Cellular Devices
The cellular/wireless performance depends on the implementation and antenna design. The integration of the
antenna system into the product is a critical part of the design process; therefore, it is essential to consider it early
so the performance is not compromised. Devices were approved with the following antenna(s) and for alternate
antennas meeting the given specifications.
Cellular and LTE Antenna
Manufacturer:
2J
Manufacturer's Model Number:
2JW1024
Multi-Tech Systems:
45009891L
Antenna Specifications
Category
Description
Frequency Range
698 - 960 MHz
1710 - 2170 MHz
2500 - 2700 MHz
Impedance
50 Ohms
VSWR
VSWR should not exceed 2.0:1 at any point across the bands of operation
Peak Radiated Gain
~0.1 dBi
~2.9 dBi
~4.6 dBi
Radiation
Omni-directional
Polarization
Linear
