CHAPTER 7 GETTING STARTED WITH THE MTQ-EV3-B01
MultiConnect
®
Dragonfly
TM
MTQ-EV3 Device Guide
37
Programming the MTQ Microcontroller
With the MTQ and the MTUDK2-ST-CELL developer board, use the ARM mbed ecosystem to program the
microcontroller. Compile in the cloud or locally, copy the resulting binary file to the mbed USB drive, and reset the
MTQ.
All MTQ software is open source.
mbed Links
Explore mbed:
http://developer.mbed.org/explore
Getting Started with mbed:
http://developer.mbed.org/getting-started
mbed Handbook:
http://developer.mbed.org/handbook/Homepage
Serial Flash Datasheet:
https://www.micron.com/~/media/documents/products/data-sheet/nor-flash/serial-
Additional Information:
http://www.multitech.net/developer/products/multiconnect-dragonfly/
MTQ Platform
The MTQ mbed page includes the MTSAS library and example programs.
https://developer.mbed.org/platforms/MTS-Dragonfly
ST Microelectronics STM32F411xC/E
For information on the STM32F411xC/E microcontroller, refer to:
Reference Manual:
ui/static/active/en/resource/technical/document/reference_manual/DM00119316.pdf
Datasheet:
http://www.st.com/web/en/resource/technical/document/datasheet/DM00115249.pdf