Multitech MultiConnect Cell MTC-G3, Руководство пользователя, Страница: 32 / 39

CONFIGURING AND COMMUNICATING WITH YOUR DEVICE
32 MultiConnect
®
Cell MTC-G3 User Guide
5. Set FTP operations timeout to 10 seconds
Enter:
AT#FTPTO=1000
6. Configure FTP server IP address with username and password.
Enter:
AT#FTPOPEN="###.##.###.#","username","password",0
where ###.##.###.# is the IP address and the username and password for the FTP server.
7. Configure file transfer type.
Enter:
AT#FTPTYPE=#
where # is 0 for binary or 1 for ASCII.
8. If required, change the working directory to "folder1".
Enter:
AT#FTPCWD="folder1"
9. Enter the file name.
Enter:
AT#FTPGET="filename.txt"
where filename.txt is the file you want to download.
The device responds with:
CONNECT
The file is received through the device. The device responds with:
NO CARRIER
The data connection closes automatically when the file sending ends.
Closing the FTP Data Connection
When you finish sending the file:
1. Close the FTP connection.
Enter:
AT#FTPCLOSE
2. Close the PPP data connection.
Enter:
AT#SGACT=1,0
The device responds with OK.
Reading, Writing and Deleting Messages
Reading Text Messages
To read a text message in text mode:
1. Put the device in text mode.
Enter:
AT+CMGF=1
2. Read message.