ANTENNA AND ACTIVATION INFORMATION
18
MultiConnect
®
Cell MTC-MNA1 User Guide
Chapter 4 – Antenna and Activation Information
Antenna System Cellular Devices
The cellular/wireless performance depends on the implementation and antenna design. The integration of the
antenna system into the product is a critical part of the design process; therefore, it is essential to consider it early
so the performance is not compromised. Devices were approved with the following antenna(s) and for alternate
antennas meeting the given specifications.
Requirements for Cellular Antennas with regard to FCC/IC Compliance
This device has been designed to operate with the antennas listed below and having a maximum antenna gain of
6.18 dBi for the 700 MHz band, 6.00 dBi for 1700 MHz band, and 9.01 dBi for the 1900 MHz frequency band.
Antennas not included in this list or that have a gain greater than specified are strictly prohibited for use with this
device. The required antenna impedance is 50 ohms.
Antenna
Devices were approved with the following antenna or for alternate antennas meeting the given specifications:
Manufacturer:
Wieson
Description:
LTE Antenna with SMA-Male Connector
Model Number
GY115IE002-001
MultiTech ordering information:
Model
Quantity
ANLTE4-1HRA
1
ANLTE4-2HRA
2
ANLTE4-10HRA
10
ANLTE4-50HRA
50
Antenna Specifications
Category
Description
Frequency Range
0.698 - 0.96 GHz
1710 - 2170 GHz
2.30 - 2.69 GHz
VSWR
3:1 maximum
Gain
2.06 dBi
Impedance
50
Ω
nominal
Radiation
Omni-directional
Polarization
Linear, vertical