Multitech cellular modem kit
1x Multitech cellular modem
2x Antenna
1x 120V Power Adapter
1x Ethernet cable
4x Rubber feet stickers
1x DIN rail mounting stick
Cellular router accessory Kit
2x Rubber O-Ring
2x Extension Cable (short, SMA)
1x DIN rail mounting clips (black)
Ensure both antennas are connected to the modem
Do not install the antennas inside a metal enclosure, underground, or anywhere the
signal may be blocked or degraded
If a dataplan is purchased at the same time as the Multitech cellular modem, the modem will come
with the SIM card installed and pre-activated on the T-Mobile network.
1. If using a non-eGauge data plan, insert the SIM card to the cellular modem according to
the Multitech quick start guide that comes with the modem.
2. If applicable, attach the DIN rail mounting stick and DIN rail clips to the Multitech cellular
modem and mount in the enclosure.
3. Connect the 2 SMA antenna extension cables to the Multitech antenna ports, and into pre-
drilled holes on the enclosure. Use the 2 rubber O-rings to make a watertight seal.
4. Attach the 2 antennas to the extension cables.
5. Connect the Ethernet cable from the eGauge to the Multitech cell modem.
Hardware included
Assembly/installation information
Example setup for installing inside
enclosure
