MultiModem GPRS and CDMA Wireless Modem
6
Multi-Tech Systems, Inc. Quick Start Guide
Insert the SIM Card into Holder (GPRS only)
The wireless modem requires a SIM card (Subscriber Identity
Module) to operate on a GPRS or EDGE network. To install the SIM
card:
1.
Using your fingernail or small screwdriver, pry off SIM cover.
2.
Insert the SIM card into the SIM card slot. The following graphic
illustrates the correct SIM card orientation.
Wireless Service Provider
will give you a SIM card.
Insert SIM card.
Replace cover.
3.
Verify that the SIM card fits properly; then replace the cover.
Hook up the Antenna, Serial Cable, and Power
•
Antenna.
Connect a suitable antenna to the SMA connector
(see the User Guide for antenna/RF specifications).
•
Serial Cable.
Connect one end of the serial cable to the
modem and the other end to a PC.
•
Power.
Plug the power supply into the wireless MultiModem.
For standard transformer power supply:
∗
Connect the AC cord and its transform block.
∗
Connect the AC cord plug into the main power outlet.
Note:
Units shipped with the universal AC power supply are
not suited for installation in hazardous locations.
For optional direct-DC powering:
∗
Connect the fused DC power cable into the power source
on a vehicle or machine in which you are mounting the
MultiModem. Be sure the GNS connection is correct.
∗
Connect the red wire to the + positive and the black wire
to the - negative.
