Multitech MTC-LEU4 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 40

Multitech MTC-LEU4 Скачать руководство пользователя страница 17

SAFETY WARNINGS

MultiConnect

®

Cell MTC-LEU4 User Guide

17

Keep the device on the opposite side of the body from the pacemaker to add extra distance between the
pacemaker and the device.

Avoid placing a turned-on device next to the pacemaker (for example, don’t carry the device in a shirt or
jacket pocket directly over the pacemaker).

Notice regarding Compliance with FCC, EU, and Industry Canada
Requirements for RF Exposure

The antenna intended for use with this unit meets the requirements for mobile operating configurations and for
fixed mounted operations, as defined in 2.1091 of the FCC rules for satisfying RF exposure compliance. This device
also meets the European RF exposure requirements of EN 62311. If an alternate antenna is used, consult user
documentation for required antenna specifications.

Compliance of the device with the FCC, EU and IC rules regarding RF Exposure was established and is given with
the maximum antenna gain as specified above for a minimum distance of 20 cm between the devices radiating
structures (the antenna) and the body of users. Qualification for distances closer than 20 cm (portable operation)
would require re-certification.

Wireless devices could generate radiation. Other nearby electronic devices, like microwave ovens, may also
generate additional radiation to the user causing a higher level of RF exposure.

«
...
15
16
17
18
19
...
»

Содержание MTC-LEU4









































Отзывы:

Нет отзывов