Multitech MT2834BR Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 90

Multitech MT2834BR Скачать руководство пользователя страница 2

MT2834BR/MT2834BLR User Guide
PN: S000316

Copyright ©2003 by Multi-Tech Systems, Inc.

All rights reserved. This publication may not be reproduced, in whole or in part,
without prior written permission from Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representations or warranties with respect to the
contents hereof and specifically disclaims any implied warranties of merchantability
or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc.
reserves the right to revise this publication and to make changes from time to time
in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any
person or organization of such revisions or changes.

Revision

Date

Description

A

11/15/2003

Initial release of MT2834BR/MT2834BLR as a
combined User Guide.

Trademarks of Multi-Tech Systems, Inc. are as follows: MultiExpress,
MultiExpressFax, MultiModem

II

, Multi-Tech and the Multi-Tech logo.

Windows is a registered trademark of Microsoft Corporation.

Technical Support

France

[email protected]

+33 1-64 61 09 81

India

[email protected]

+91 124 6340778

U.K.

[email protected]

+44 118 959 7774

U.S., Canada

[email protected]

(800) 972-2439

Rest of World

[email protected]

+763 717-5863

World Headquarters

Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, Minnesota 55112 U.S.A.
(763) 785-3500 or (800) 328-9717
U.S. FAX (763) 785-9874
Technical Support (800) 972-2439
www.multitech.com

«
1
2
3
4
...
»

Содержание MT2834BR



























































































Отзывы:

Нет отзывов