Multitech ISI4604-PCI, Руководство пользователя

Страница: 47 / 70

47
Chapter 3—Software/Driver Installation
3. Copy files from floppy to a temporary directory on hard drive.
> mkdir /isi
> cd /isi
> cp /mnt/floppy/kernel_2.2.x/* /isi
After you have copied the installation tar file to a folder, use the
command 'tar xvf isilinux.tar' to untar (unzip or de-compress) the
installation files in that folder.
LINUX: Driver installation and loading
Execute the 'Install' script to build the driver and to copy the driver and
firmware files to the required folder.
> cd /isi
> ./Install
For ISI460x-PCI cards, which are equipped with the PCI-type bus,
simply press ENTER when asked for addresses and IRQs. The
installation creates the script file 'ISICOMStart' in the destination
folder. 'ISICOMStart' automates the loading process for the driver and
firmware.
To view busy I/O address space on your system, enter
cat/proc/ioports
To view busy IRQs, enter:
cat /proc/interrupts
You must load the driver before you can load the firmware. You can
load the driver manually using the 'insmod' utility. For ISI cards with
the ISA bus, the I/O base address and the IRQ required by the card
also need to be passed as parameters to insmod (this does not apply to
ISI460x-PCI cards, which are equipped with the PCI-type bus).
insmod isicom io=card1, ... card4 irq=card1,
... card4
All manuals and user guides at all-guides.com