Multitech CommPlete 4000, Руководство пользователя, Страница: 50 / 50

c. Users are advised to check the numbers entered during the Auto Call set up phase
prior to dialing.
d. The user should not issue any sequence of commands to the modem which would
cause the modem to exceed the maximum allowable pause of 8 seconds from the
time the modem goes off hook until dialing begins.
e. For correct operation of the call progress monitor, the power has to be properly connected
and switched on.
Compliance with BS6328 Part 1
a. The modem is not suitable for use on circuits with British Telecommunications signaling at
a normal frequency of 2280 Hz.
b. The modem does not require signaling or otherwise employ the frequency range dc to 200
Hz.
c. The modem does not require dc from the Private Circuit for correct operation. The modem
may be damaged if connected, in a private circuit mode, to a circuit supplying dc current
(the maximum permissible direct current is zero amps).
c:\jeff\modems\int'l
<ce.fh4> <ce.eps>
EMC, Safety, and Terminal Directive Compliance
The CE mark is affixed to this product to confirm compliance with the following European
Community Directives:
Council Directive 89/336/EEC of 3 May 1989 on the approximation of laws of Member States
relating to electromagnetic compatibility;
and
Council Directive 73/23/EEC of 19 February 1973 on the harmonization of the laws of Member
States relating to electrical equipment designed for use within certain voltage limits;
and
Council Directive 98/13/EEC of 22 March 1998 on the approximation of the laws of the Member
States concerning telecommunications terminal and satellite earth station equipment.