CallFinder Cabling Guide
Cabling Instructions
Summary
: Place the CallFinder in a convenient location, and
then connect it to earth ground, to your AC power outlet, to your
Ethernet network, and to your telco DID service. You cannot
connect the CallFinder's Extension Ports (FXS/FXO) to your
PBX until after you have configured the CallFinder software. In
the CallFinder software, you will configure the Extension Ports
as either FXS or FXO, and this must be done before they can be
connected to your PBX.
Connect CallFinder to Earth Ground
Connect the CallFinder’s ground connector to a true earth
ground (the ground of your building’s electrical system).
Grounding connectors
must be secured
permanently to
product ground screw
and earth ground screw.
Earth Ground Screw:
Connected to
Permanent Earth Ground
of Building’s
Electrical System
Ground Wire:
Size 18AWG
or thicker
Product
Ground
Screw
GND
MultiTech Systems, Inc.
7
